Healthcare IPS

Willis Systems’ Hospital IPS and sanitaryware have been used extensively over the past decades on many major hospital projects. Among our comprehensive list of prestigious contracts are traditional, design & build and PFI funded hospitals.

Panel Units

Typical NBS Specification

K32 Panel Cubicles / Duct and Wall Linings / Screens

Our ranges of panel units are tested to high standards of hygiene and durability. They comply entirely with Health Technical Memoranda 68 (HTM68).

Our fully integrated units are pre-plumbed, making them compatible with methods to combat Legionnaires Disease and adhere to the 2019 standards of Health Technical Memoranda 64 (HTM64), superseded in 2013 by Health Building Note 00-10 Part C: Sanitaryware Assemblies.

We ensure Willis Systems’ hospital integrated plumbing systems (IPS) match and exceed the latest 2019 guidance by manufacturing only from waterproof Solid Grade Laminate (SGL).

Future maintenance was foremost in our minds when we introduced our innovative pull / push swivel hinge, which works in any room situation since it allows access in tight corners and obstructed areas.

 

Scroll Down for More Information

Categories: ,

Design

IPS Frame Options – See Following Tabs for Further Details

    • Stand Alone Box-Out Unit (Frame Type BP3)
    • Corner Box-Out Unit (Frame Type BP2)
    • Recessed Unit (Frame Type BP1)

Panels

    • Bespoke panel widths and sizes to suit HTM fixtures.
    • 13mm Solid Grade Laminate (SGL) panels complete with radiused or chamfered edges.
    • Panels pre-hung at works to 25mm WPB Plywood subframes with secret fixings.
    • Panels with pull and pivot hinge as standard for ease of maintenance.
    • Cam locks or anti vandal fixings available to secure panels if required.
    • Option to provide panels with factory made cut-outs to suit customer’s sanitaryware.

Stand Alone Box-Out Unit (BP3)

Designed as a self contained unit and typically sited in an isolated position in a room our boxed out unit maintains the integrity of acoustic walls as well as  maintaining the fire integrity of the room. The BP3 comes ready pre plumbed with taps basins and sanitaryware fittings to give exceptional ease of installation saving valuable time on site.

Specification

    • Box out frame 25mm WBP Plywood faced with High Pressure Laminate HPL and 3mm PVC edging.
    • Face panels 13mm Solid Grade Laminate ( SGL) in sections factory fitted to Plywood subframe.
    • Top access panels hinged with heavy duty pull and pivot action.
    • Selection of cam locks and anti vandal fixings for top and bottom access panels.



Features

    • Box depth can be varied to suit service requirements.
    • Walk in, fix and ready to go  module that makes time on site and disruption minimal.
    • Easy access for future maintenance via hinged panels to service valves.
    • Panels can withstand abuse with many Anti vandal features built in.
    • Panels can withstand saturation in water.

Corner Box-Out Unit (BP2)

Designed as a self contained unit to be sited in a corner of a room to save space or enclose a rising soil and vent pipe.

 

Specification

    • Box out frame 25mm WBP Plywood faced with High Pressure Laminate HPL and 3mm PVC edging.
    • Face panels 13mm Solid Grade Laminate ( SGL) in sections factory fitted to Plywood subframe.
    • Top access panels hinged with heavy duty pull and pivot action.
    • Selection of cam locks and anti vandal fixings for top and bottom access panels.



Features

    • Box depth can be varied to suit service requirements.
    • Walk in, fix and ready to go  module that makes time on site and disruption minimal.
    • Easy access for future maintenance via hinged panels to service valves.
    • Panels can withstand abuse with many Anti vandal features built in.
    • Panels can withstand saturation in water.


Recessed Unit (BP1)

This is most cost effective unit having the benefit of not protruding into the room so giving maximum space saving solution to a bedroom backing onto an en suite or where services can be shared back to back on a partition wall.

The BP3 comes ready pre plumbed with taps basins and sanitaryware fittings to give exceptional ease of installation saving valuable time on site.

Ressed units can also be used in Ensuites where a secondary wall is constucted with aperatures provided to accomodate the unit.

Specification

    • Face panels 13mm Solid Grade Laminate ( SGL) in sections factory fitted to Plywood subframe.
    • Top access panels hinged with heavy duty pull and pivot action.
    • Selection of cam locks and anti vandal fixings for top and bottom access panels.


Recessed IPS

Recessed IPS


Features

    • Walk in, fix and ready to go  module that makes time on site and disruption minimal.
    • Easy access for future maintenance via hinged panels to service valves.
    • Panels can withstand abuse with many Anti vandal features built in.
    • Panels can withstand saturation in water.

Healthcare IPS – Simple to Install

Sometimes site access logistics require large sanitaryware units such as dirty utility combination units or scrub-up troughs to be fitted at point of use.  In this case, we ensure all fixing points are pre-drilled and waste holes are pre-routered, all at works, to minimise site installation time.

Clinical Box-Out Units – 3 Step Guide

Typical NBS Specification

N13 sanitaryware appliances / fittings

As we are not a subsidiary of a sanitaryware company, we are free and able to use any combination of vitreous china, stainless steel and brassware from all leading brands at very competitive rates.

Our standard offerings of hospital sanitaryware are from Armitage Shanks’ healthcare range.  Full details of touch-free sensor taps, specialised WC basins and HTM64 compliant sanitaryware are available online here.

We also buy direct from Delabie and can offer a full range of both TMV and Equal Pressure mixer taps for hospital use.

Download Link

WILLIS SYSTEMS COLOUR CHART 2020

Download Brochure

POLYREY ANTIBACTERIAL LAMINATE BROCHURE